<html>
<center><a href="http://www.greatlakesxj.com/tech.html"><img src="http://www.greatlakesxj.com/tech/techheader.jpg" border="0"></a><p>
<b>Great Lakes XJ Tech Article</b></center><p>
<b>XJ 4.0L Serpentine Belt Adjustment</b><p>

The 4.0L engine does not have an tensioner for the serpentine belt. The adjustment is at the power 
steering pump. Just loosen the power steering pump rear mounting bolts, pivot bolt and lock 
nut and then loosen the power steering pump adjusting bolt.<P>

<center><img src="http://www.greatlakesxj.com/tech/serpbelt1.jpg"></center><P>

Slip the belt on and tighten the adjusting bolt until you can push the belt in about one inch 
midway between the A/C and alternator pulleys. Then tighten the lock nut, pivot bolt and 
mounting bolts and that's it.<P>

<center><img src="http://www.greatlakesxj.com/tech/serpbelt2.jpg"></center><P>

</body><p><center>
Copyright © Great Lakes XJ

</html>�